Order online or call 800-431-2712
Joint Sealant, No 6
Utility Manufacturing # 12-305
$7.99
Joint sealer is both a sealing and a lubricating medium if set up quickly to a firm plastic seal that will not shrink, crack or crumble. Minimize or Learn More more... |
Pipe Joint Compound, 8 oz
Utility Manufacturing # 12-206
$5.99
Especially good for brass and for all threaded connections on gas, air, water, steam lines etc. New improved formula cuts plumbing installation and repair time. Will not spill or dry out. It seals and lubricates fitting and valves on gas, air, water and steam lines. Contains no lead and wipes clean. Remains plastic indefinitely on hot or cold pipes and won't shrink, crumble or crack. Ensures tight joints and prevents fittings freezing to threads. Minimize or Learn More more... |
Pipe Thread Compound
PlumbShop # PS2434
$4.29
Pipe thread dope with PTFE lubricates and seals. For use on tapered pipe thread connections, including plastic. Minimize or Learn More more... |
Pipe Thread Compound, 2 oz
PlumbShop # PS2448
$2.69
Lubricates as it seals and helps prevent erosion. For use on tapered pipe thread connections. Minimize or Learn More more... |
Seal 'N Check Test Kit
BrassCraft # PS1087
$3.99
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading. Minimize or Learn More more... |
1.75 oz No 5 Pipe Thread Sealant
Rectorseal Corporation # 25790
$3.99
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings. Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel,polyethylene, fiberglass reinforced, and PVC pipe. Conforms to TT-S-1932. Minimize or Learn More more... |
1.75 oz T Plus 2 Pipe Thread Sealant
Rectorseal Corporation # 23710
$3.99
Non-setting, multi-purpose compound contains teflon, plus synthetic fibers. May be pressurized immediately following application. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglassreinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732. Minimize or Learn More more... |
16 oz No 5 Pipe Thread Sealant
Rectorseal Corporation # 25431
$17.99
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings. Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel,polyethylene, fiberglass reinforced, and PVC pipe. Conforms to TT-S-1932. Minimize or Learn More more... |
8 oz No 5 Pipe Thread Sealant
Rectorseal Corporation # 25551
$11.49
Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings. Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel,polyethylene, fiberglass reinforced, and PVC pipe. Conforms to TT-S-1932. Minimize or Learn More more... |
Harvey Gas Thread Sealant, 8 oz Yellow
William H. Harvey # 025050
$9.49
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50d F to +400d F; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Minimize or Learn More more... |
Harvey Seal Yellow Gas Thread 16 oz
William H. Harvey # 25080
$16.99
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50d F to +400d F; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Minimize or Learn More more... |
Megaloc Pipe Thread Seal, 1 Pt
Oatey # 15808
$21.99
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulicresistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Minimize or Learn More more... |
Megaloc Pipe Thread Seal, 1/2 Pt
Oatey # 15806
$12.99
For use on both plastic and metal pipe and fittings. Grit-free and does not contain PTFE (teflon). Sets soft; no cure time required. Never hardens, cracks or becomes brittle. No odor. Non-separating, non-flammable, and non-hazardous. Leak-proof hydraulicresistance to 12,000 psi. Withstands gas pressure to 2,600 psi. Performs over a temperature range of -50 degrees to 400 degrees F (on steel pipe). For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Not recommended for lines carrying concentrated acids, alkalis, ketones, and oxygen. Certified to ANSI/NSF Standard 61; safe for drinking water lines. UPC listed. Meets CSA requirements 4-90 for gas. Meets Fed. Spec. TT-S-1732. Minimize or Learn More more... |
Pipe Compound, 8 oz
William H. Harvey # 029035
$3.29
Thixotropic, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Minimize or Learn More more... |
Pipe Joint Compound
Oatey # 31226
$1.29
Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Minimize or Learn More more... |
Pipe Joint Compound & Pipe Dope
Oatey # 31230
$4.29
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Minimize or Learn More more... |
Pipe Joint Compound, 1 Oz
Oatey # 31229
$2.29
Lubricates and seals all threaded joints. White, non-hardening, non-separating, non-toxic paste. Withstands up to 3,000 PSI on gases from -50 to +400 degrees Fahrenheit, and 10,000 PSI on liquids from -50 to +500 degrees Fahrenheit. For use with water, steam, natural and LP gas, oil, caustics or dilute acid lines of PVC, CPVC, ABS, Cycolac, Polypropylene, iron, steel, or copper. NSF and IAPMO listed. Minimize or Learn More more... |
Pipe Joint Compound, 2 oz
Plumb Pak Corporation # PP854-2
$4.29
|
Pipe Thread Compound
William H. Harvey # 028005-144
$1.49
For sealing and lubricating threaded pipe joints. In smooth paste form. For steam, water, air, and natural gas. Does not contain lead. Wipes clean from hands. Minimize or Learn More more... |
Pipe Thread Compound
William H. Harvey # 29048
$6.99
Thixotropic, non-drip paste for pipe joint threads on lines carrying water, steam, air or natural gas. Prevents corrosion to threads. Never hardens, joints separate easily. Contains no lead, non-toxic. Do not apply to plastic threads. Use Harvey's TFE Paste or PTFE Tape made of TEFLON on plastic threaded joints. Minimize or Learn More more... |
Pipe Thread Compound
William H. Harvey # 25020
$5.29
Use on all metals, plastic PVC, CPVC, ABS and nylon threads. Tolerates -50d F to +400d F; gas to 3000 PSI, liquid to 6000 PSI. Soft, slow drying, never seizes, allows easy disassembly. SEALANT for all types of gas lines. Minimize or Learn More more... |
